3Pcs Raindrops Rain Detection Sensor Module Weather Humidity
221
Direct purchase from the factory 
Echekwabara nlele
Onyinye efu
Amụma mbupu
Amụma nlọghachiOnyinye efu
Nabata na Roymall, websaịtị ọkachamara gị maka ịzụrụ onyinye ụlọ ahịa dị elu. Anyị ji nkwado gị kpọrọ ihe ma na-eji obi ekele gị maka ime ka ihe ịzụrụ gị nwee obi ụtọ. Mgbe ị na-azụ ihe anyị, ọ bụghị naanị na ị ga-enweta ngwaahịa dị elu nke na-eme ka ndụ gị dị mma, kamakwa ị ga-enweta onyinye efu pụrụ iche na iwu ọ bụla ị nyere. Ị dị njikere inyocha nchịkọta anyị wee chọta onyinye gị kacha mma? Nyochaa nhọrọ anyị nke ihe ụlọ ahịa dị elu, tinye iwu gị, ma na-atụ anya obi ụtọ nke onyinye efu gị na-abịa n'akụkụ ihe ịzụrụ gị.Amụma mbupu
Anyị ga-agba mbụ bufee ihe gị mgbe anyị nwetasịrị iwu gị ma hụ na ha ruru n'udo. A ga-enye nkọwa nnyefe na email nkwenye gị.N'ọtụtụ oge, a na-edozi iwu n'ime ụbọchị 2.N'ọnọdụ pụrụ iche, ọ ga-egbu oge dị ka ndị a: Mgbe ị tinyere iwu na Satọde, Sọnde ma ọ bụ ezumike ọha, ọ ga-egbu oge maka ụbọchị 2..Ọ na-adịkarị mkpa ụbọchị ọrụ 5-7 (Mọnde ruo Fraịde) na-enweghị mmetụta site na igbu oge ụgbọ elu ma ọ bụ ihe gburugburu ebe obibi ndị ọzọ..Ebe ọ bụ na ọrụ mbupu anyị bụ n'ụwa niile, oge nnyefe ga-adabere na ọnọdụ gị, yabụ ọ nwere ike ịchọ oge ụfọdụ ma bụrụ na ị nọ na mpaghara ma ọ bụ mba ndị dịpụrụ adịpụ, jiri nwayọọ chere.1. Amụma nlọghachi & mgbanwe
Anyị na-anabata naanị ihe ndị a zụrụ na roymall.com. Ọ bụrụ na ị zụrụ n'aka ndị nkesa anyị ma ọ bụ ndị na-ere ahịa ndị ọzọ, ị gaghị enwe ike ịlaghachi ha n'akụkụ anyị. A naghị anabata ihe ire ere ikpeazụ ma ọ bụ onyinye efu maka nlọghachi. Iji ruo eru maka nlọghachi, ihe gị ga-abụrịrị na ejibeghị ya ma nọrọ n'otu ọnọdụ ahụ ị nwetara ya. Ọ ga-abụkwa na nkwakọ ngwaahịa mbụ.Mgbe anyị nwetasịrị ntuziaka nlọghachi, biko chịkọta ihe gị laghachiri ma dobe ngwugwu gị n'ụlọ ọrụ nzipu ozi mpaghara ma ọ bụ onye ozi ọzọ.Anyị ga-edozi ihe gị laghachiri ma ọ bụ gbanwee n'ime ụbọchị ọrụ 3-5 mgbe anyị nwetasịrị ya. A ga-edozi nkwụghachi ego ma kwụọ ya na ụzọ ịkwụ ụgwọ mbụ gị na-akpaghị aka.Enweghị ike ịnabata nlọghachi ma ọ bụ mgbanwe ma ọ bụrụ na emepụtara ngwaahịa ahụ, gụnyere nha omenala, agba omenala, ma ọ bụ mbipụta omenala.Chọrọ enyemaka ọzọ, biko kpọtụrụ anyị. service@roymall.com ma ọ bụ Whatsapp: +8619359849471
2.Amụma nkwụghachi ego
Ị ga-enweta nkwụghachi ego zuru ezu ma ọ bụ kredit ụlọ ahịa 100% mgbe anyị nwetasịrị ngwugwu a laghachiri ma lelee ya. A ga-edozi nkwụghachi ego ma kwụọ ya na ụzọ ịkwụ ụgwọ mbụ gị na-akpaghị aka. Biko rịba ama na ụgwọ mbupu na ụgwọ ọ bụla ma ọ bụ ụgwọ anaghị akwụghachi. A naghị akwụghachi ụgwọ mbupu ndị ọzọ ozugbo ebugara ngwugwu ahụ. Ị na-ahụ maka ịkwụ ụgwọ ndị a na anyị enweghị ike ịhapụ ma ọ bụ kwụghachi ha, ọbụlagodi ma ọ bụrụ na eweghachiri iwu ahụ anyị.Ọ bụrụ na ị nwere nsogbu ọ bụla gbasara usoro nkwụghachi ego, biko kpọtụrụ anyị. service@roymall.com ma ọ bụ Whatsapp: +8619359849471
Description:
1. The item is for robot kit, raindrops, rain sensor, monitoring can be used for a variety of weather conditions, and converted into the number of the reference signal and the AO output.
2. The sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity;
3. The output in the form: digital switching outputs (0 and 1) and analog AO voltage output;
4. TTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer, a small fan, and so on.
5. Sensitivity can be adjusted via potentiometer
6. LED lights up when there is no rain output is high, raindrop up, the output ground level, LED light.
Specification:
Small board PCB size: 3.2cm x 1.4cm
Operating voltage: 3.3V-5V
Voltage: 5V
Features:
1. Distribution bit to adjust sensitivity
2. A fixed bolt hole for easy installation
3. Power indicator, the output signal LED indicator
4. The comparator output, the signal is clean, waveform, driving ability over 15mA
5. Wide voltage LM393 comparator
6. A large area of rain board, more conducive to detect rain
7. Board with positioning holes to facilitate installation
8. Raindrops and control panels are separate, easy to wire leads
How to use:
1. Connected to 5V power supply, the power indicator light, sensor board is not water droplets, DO output is high, the switch lights off, dropping on a drop of water, DO output is low, the indicator light switch, Brush off the the above water droplets, has returned to output high state.
2. AO analog output can be connected to the microcontroller AD port to detect the size of the drops in the above rainfall.
3. DO TTL digital outputs can also be connected to the microcontroller detects whether there is rain.
Connection mode:
1. VCC: positive power supply (3-5V)
2. GND: negative one.
3. DO: TTL switching signal output
4. AO: Analog signal output
Package include:
3x Rain sensing board
3x Control board
3x 20cm Dupont Line set
1. The item is for robot kit, raindrops, rain sensor, monitoring can be used for a variety of weather conditions, and converted into the number of the reference signal and the AO output.
2. The sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 * 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity;
3. The output in the form: digital switching outputs (0 and 1) and analog AO voltage output;
4. TTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer, a small fan, and so on.
5. Sensitivity can be adjusted via potentiometer
6. LED lights up when there is no rain output is high, raindrop up, the output ground level, LED light.
Specification:
Small board PCB size: 3.2cm x 1.4cm
Operating voltage: 3.3V-5V
Voltage: 5V
Features:
1. Distribution bit to adjust sensitivity
2. A fixed bolt hole for easy installation
3. Power indicator, the output signal LED indicator
4. The comparator output, the signal is clean, waveform, driving ability over 15mA
5. Wide voltage LM393 comparator
6. A large area of rain board, more conducive to detect rain
7. Board with positioning holes to facilitate installation
8. Raindrops and control panels are separate, easy to wire leads
How to use:
1. Connected to 5V power supply, the power indicator light, sensor board is not water droplets, DO output is high, the switch lights off, dropping on a drop of water, DO output is low, the indicator light switch, Brush off the the above water droplets, has returned to output high state.
2. AO analog output can be connected to the microcontroller AD port to detect the size of the drops in the above rainfall.
3. DO TTL digital outputs can also be connected to the microcontroller detects whether there is rain.
Connection mode:
1. VCC: positive power supply (3-5V)
2. GND: negative one.
3. DO: TTL switching signal output
4. AO: Analog signal output
Package include:
3x Rain sensing board
3x Control board
3x 20cm Dupont Line set
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
